> ## Documentation Index
> Fetch the complete documentation index at: https://docs.eventsbadge.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Open on mobile

> Load the Badge staff station on a phone or tablet using the 6-character access code or the deep-link QR — no login required.

The staff station is the mobile-optimized check-in UI your event team uses on phones and tablets. There's no app to install and no Badge login. Staff load a URL, enter the 6-character access code for the event, and land in **Check-in mode**. This page walks the staff side of that flow.

> [!NOTE]
>
> **Before you start**
>
> * The event manager has shared the 6-character access code or the deep-link QR. See [Get the access code](https://docs.eventsbadge.com/staff-stations/get-access-code.md).
> * You have a phone or tablet with a modern browser. Chrome on Android and Safari on iOS are the tested combinations.
> * The device is on Wi-Fi or cellular data. The staff station calls Badge in real time on every scan and search.

## Open by URL and code

This is the path staff use when they have just the code, not a QR.

**1. Open the staff URL**

On the phone or tablet browser, go to `eventsbadge.com/badge/staff`. The landing screen is a single card titled **Staff Access** with six empty input boxes underneath.

![Staff Access card with six empty boxes for the access code](https://mintcdn.com/eventsbadge/sVLPHidr7TFp4nzL/images/screens/staff-code-entry.png?fit=max\&auto=format\&n=sVLPHidr7TFp4nzL\&q=85\&s=ebbf1088bdbbe133042b4c38272ba815)

The Staff Access screen

**2. Enter the 6-character access code**

Tap the first input and type the code. The input uppercases each character as you type, so `r4k8zp` and `R4K8ZP` are the same code. The on-screen keyboard shows letters and digits only.

**3. Wait for verification**

The instant you type the sixth character, the page shows a small **Verifying…** spinner under the inputs and checks the code against the event. A valid code opens **Check-in mode** for the event. An invalid code shows **Invalid access code. Please check and try again.** under the inputs and clears the boxes so you can re-enter.

You'll land in the check-in workspace. See [QR scan check-in](https://docs.eventsbadge.com/staff-stations/qr-scan-checkin.md) for what happens next.

## Open by QR (faster)

If the event manager printed the **Staff Access** QR or sent a screenshot:

**1. Open the camera or QR scanner**

On iOS, point the built-in Camera app at the QR. On Android, point the camera at the QR. Most camera apps detect QR codes automatically. A notification appears at the bottom of the screen with the URL.

**2. Tap the notification**

The phone opens the URL in your default browser and lands directly in **Check-in mode**. No code entry needed.

## What to expect

A few details that come up often:

* **No login screen, ever.** The 6-character code is the only credential. If a Badge login screen appears, you opened the wrong URL. Go back to `eventsbadge.com/badge/staff`, not `eventsbadge.com`.
* **Reopen the same link to come back.** The check-in address carries the code, so reopening it or rescanning the QR returns you to Check-in mode, with the print station you picked still selected on that device.
* **A laptop opens the print station instead.** In Chrome or Edge at 1,024 px or wider, the link opens **Station Setup** for a print station. To use the phone layout on that device, click **Use check-in mode** under the setup card.
* **The code scopes you to one event.** You can't switch to another event from inside the staff UI; only by entering a different code on `/badge/staff`.

## Mobile setup tips

A few practical setup notes for an event day:

* **Use the device camera, not a separate scanner app.** The QR scanner inside Check-in mode is part of the page. It opens when you tap **Scan Ticket**. It needs camera permission, which the browser asks for the first time. Granting permission once persists for the session.
* **Keep the device on Wi-Fi or cellular.** The staff station calls Badge on every scan and search. If the network drops mid-event, reconnect to resume.
* **Turn off auto-lock for the device.** The browser tab needs to stay open for the scanner to keep working. Disable auto-lock or extend the screen timeout to the maximum.
* **Charge fully before doors open.** Running the camera scanner for a few hours drains a phone battery noticeably faster than typical usage.

## Troubleshooting

### "Invalid access code"

Double-check the 6 characters: `0` (zero) vs `O` (letter), `1` (one) vs `I` (capital I), `5` vs `S`. The code only accepts letters and digits, and the input pattern enforces this. If the code still rejects after a careful re-type, ask the event manager to confirm. The code may have been read off the wrong event page.

### "Failed to verify access code"

The device lost network connectivity between typing the code and the server response. Reconnect to Wi-Fi or switch to cellular, then re-enter the code.

### "Too many invalid codes"

Too many codes that don't exist were tried from this network, so code checks from it pause for 10 minutes. Wait, then tap **Try again** or re-enter the code carefully.

### A link shows "This access code is no longer active"

The code in the link doesn't match any event, usually because a character was lost when the link was copied. Tap **Enter a new code** and type the code, or ask the event manager for the current staff link.

### The browser keeps redirecting to a login screen

You're on the wrong URL, likely `eventsbadge.com/login` (the sign-in screen) instead of `eventsbadge.com/badge/staff` (the staff entry). Open a fresh tab and use the exact URL above, or scan the QR.

## Related

* [Get the access code](https://docs.eventsbadge.com/staff-stations/get-access-code.md). Where the event manager finds and shares the code.
* [QR scan check-in](https://docs.eventsbadge.com/staff-stations/qr-scan-checkin.md). Scan attendee QR codes with the device camera.
* [Manual search check-in](https://docs.eventsbadge.com/staff-stations/manual-search-checkin.md). Search by name or email when scanning fails.
* [Access codes](https://docs.eventsbadge.com/concepts/access-codes.md). Concept page covering security model and scope.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.