> ## Documentation Index
> Fetch the complete documentation index at: https://docs.eventsbadge.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Windows troubleshooting

> Replace the printer's Windows driver with WinUSB using Zadig when your browser on Windows can't see or open your Zebra printer.

On a Windows laptop, the printer sometimes stays off the list in the pairing dialog, or connecting fails with `Windows is holding the printer with its own driver. Follow the Windows printer guide, then retry.` That message carries an **Open guide** button that opens this page. Windows has assigned the printer its own print driver, and that driver keeps the browser from opening the device. Replacing it with **WinUSB** through the free [Zadig](https://zadig.akeo.ie/) tool fixes both symptoms. You do this once per laptop for each printer model.

## Switch the printer to WinUSB

> [!NOTE]
>
> **Before you start**
>
> * The printer is powered on and connected to the laptop over USB.
> * You can approve a Windows administrator (User Account Control) prompt.
> * Unplug other USB devices such as receivers and headsets, so the printer is easy to pick out in Zadig.

**1. Download and run Zadig**

Download the current release from [zadig.akeo.ie](https://zadig.akeo.ie/). It's a single portable `.exe` with nothing to install. Open it and click **Yes** on the User Account Control prompt.

**2. List all devices**

Open the **Options** menu and tick **List All Devices**. Zadig hides devices that already have a driver until you do.

![Zadig Options menu with List All Devices ticked](https://mintcdn.com/eventsbadge/sVLPHidr7TFp4nzL/images/badge/printer-setup/windows/zadig-list-all-devices.png?fit=max\&auto=format\&n=sVLPHidr7TFp4nzL\&q=85\&s=8a34ba9942983d55baa5aaf0afb9f895)

Options → List All Devices

**3. Select your printer**

Pick the printer from the dropdown. Zebra printers appear under their USB name, for example `ZTC ZD220-203dpi ZPL`. Check the first **USB ID** box before you continue: it reads `0A5F` for Zebra. Any other value means a different device is selected.

![Zadig device dropdown with a Zebra ZD220 printer highlighted](https://mintcdn.com/eventsbadge/sVLPHidr7TFp4nzL/images/badge/printer-setup/windows/zadig-select-printer.png?fit=max\&auto=format\&n=sVLPHidr7TFp4nzL\&q=85\&s=b5d9061f2dfafc54cb9de39ae07bc8d0)

The printer selected in the device list

**4. Replace the driver**

Make sure the target driver on the right reads **WinUSB**, then click **Replace Driver**. Wait until Zadig reports that the driver was installed.

![WinUSB selected as the target driver above the Replace Driver button](https://mintcdn.com/eventsbadge/sVLPHidr7TFp4nzL/images/badge/printer-setup/windows/zadig-replace-driver.png?fit=max\&auto=format\&n=sVLPHidr7TFp4nzL\&q=85\&s=1f0ac0ae142424d730a582818bd17fab)

Target driver set to WinUSB

**5. Restart and pair again**

Restart the laptop. Then pair the printer from the template editor or the station's **Printer** settings as described in [Connect a printer](https://docs.eventsbadge.com/printer-setup/webusb-connection.md).

> [!NOTE]
>
> After the switch, Windows no longer lists the printer under **Printers & scanners**. To use it with other Windows software again, open **Device Manager**, uninstall the printer under **Universal Serial Bus devices** with **Attempt to remove the driver for this device** ticked, and plug it back in.

## Related

* [Connect a printer](https://docs.eventsbadge.com/printer-setup/webusb-connection.md). Pair the printer once the driver is replaced.
* [Supported printers](https://docs.eventsbadge.com/printer-setup/supported-zebra-models.md). Zebra models that pair over USB.
* [Calibration and troubleshooting](https://docs.eventsbadge.com/printer-setup/calibration-troubleshooting.md). Blank, misaligned, or faint prints after pairing.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.